Blogs

HoopingStation se consacre au partage de connaissances sur l'utilisation des machines à broder et des tambours à broder magnétiques. Rejoignez-nous et explorez le monde de la broderie, notamment avec l'aide de votre amie Sewtalent Brand !

A screen capture of Brother PE Design with the Modify Overlap menu open and Remove Overlap highlighted, right before the piping stitch distortion appears.
A close-up shows the presser foot assembly moving freely after the adjustment screw is loosened, demonstrating the exact point where height calibration happens.
Close-up of binder clips securing a water-soluble topper and sleeve fabric to a metal fast frame right before stitching.
The host holds up the finished, pressed St. Patrick’s Day male gnome embroidery with the text “Lucky and I Gnome It.”
The Janome Memory Craft 9850 sits fully unboxed on a desk, ready for its first power-on and test stitch.
A screen diagram of a pink circle with blue arrows showing how stitch direction creates push and pull forces that distort embroidery.
The instructor holds a finished OESD freestanding lace fall floral pumpkin, showing its 3D shape and stitched lace panels.
A close-up of the fully trimmed pumpkin appliqué inside the hoop, ready for the final satin stitch border.
A close-up of the finished “HOPE” appliqué embroidery stitched on a pink hoodie while still hooped in the Brother PE800.
A finished blue knit beanie is held up to show a clean orange cat design with sharp lettering on the cuff.
A close-up shows curved appliqué scissors trimming the inside of an embroidered letter O using a pre-cut starter hole for clean negative space.
Close-up of a Janome embroidery machine stitching a name onto dimple dot minky with a clear water-soluble topper in place.
A fully assembled Melco Bravo cart with casters and shelves installed, ready for the machine to be mounted.
Macro close-up of the fixed knife deflecting slightly upward as the moving knife passes underneath, confirming proper scissoring pressure.
A finished floral, reversible KitchenAid mixer cover with an embroidered monogram sits neatly on the mixer for the final reveal.
Barbara presses the inner ring into the outer embroidery hoop over stabilizer, demonstrating the flat-surface hooping method.
The Design Shop v11 Styles window is open, highlighting the workflow that automatically optimizes puff alphabet stitch settings for 3D foam.
George holds the 10x10 magnetic frame used for Edge-to-Edge Quilting on the Baby Lock Solaris Vision.
A wide shot of a Baby Lock embroidery machine with a 5x7 hoop attached, stabilized and ready to stitch a Free Standing Lace awareness ribbon earring set.
A 3D simulation preview of the finished satin-stitched letter P, showing the final puff texture and thread coverage.
A close-up shows a wide-angle cap frame being mounted onto a hooping gauge, ready for visor hooping.
Close-up of hands pressing a tubular hoop frame into the bottom ring to secure a polo shirt for left-chest embroidery.
Close-up of a recycled denim tote bag featuring circular patches and free-motion quilting details.
Catherine demonstrates the “floating” concept with hand motions, showing how stabilizer can be added or used as the only hooped layer.
A dramatic, low-light reveal of a Yuemei multi-head embroidery machine with the thread stand visible.
A close-up of a finished red quilt block with a lemonade pitcher embroidery and subtle stippling-style background quilting stitched around it.
A Design Shop fill object showing a curved stitch direction line that controls stitch flow through the shape.
A full-screen preview of the finished Hatch embroidery design showing the stippled circle, heart with highlights, banner, and curved “True Love” lettering.